1. Open 'asdm-launcher.exe'.
2. Click on 'Configuration'.
3. Click on 'VPN'.
4.
26 October 2010
25 October 2010
How to show a specific Address Book firstly in Outlook?
1. Open Outlook.
2. 'Tools / Address Book'.
3. 'Tools / Options'.
4. Select one in 'Show this address list first'.
5. Click on 'OK'.
6. Done.
2. 'Tools / Address Book'.
3. 'Tools / Options'.
4. Select one in 'Show this address list first'.
5. Click on 'OK'.
6. Done.
22 October 2010
desktop turned 90 degrees
hit Ctrl+Alt and the up/down arrow keys it'll rotate the screen 90 degrees.
The application failed to initialize properly (0xc0000005):Google chrome
http://techblissonline.com/google-chrome-application-failed-initialize/
1. If you faced “The application failed to initialize properly (0xc0000005).Click on OK to terminate the application.” error with google chrome (chrome.exe) and you are using symantec, then you could try the following steps:
Back up the registry on an affected system
Open the registry on the Agent system by entering regedit from a run prompt
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SysPlant
Open the Start DWORD
Change the value from 1 to 4 to disable the drivers
Reboot the system to commit the changes
2. The other easier solution is to run Google Chrome with --no-sandbox (with two dashes before “no”). To run it with the above option, edit the property of the shortcut you use to launch Google chrome and add the above option at the end of the “target” line (after the path to the chrome exe) i.e. Right click your shortcut to “Google Chrome” and click Properties. In the target text field, add a space then add --no-sandbox (with two dashes before “no”) right after the ending quotation mark. Run using this shortcut.However make sure that there is a space in between the ending quotation mark and the --no-sandbox option that you add.You could find a shortcut to google chrome on your desktop.Also note that you should use two dashes before “no”.
1. If you faced “The application failed to initialize properly (0xc0000005).Click on OK to terminate the application.” error with google chrome (chrome.exe) and you are using symantec, then you could try the following steps:
Back up the registry on an affected system
Open the registry on the Agent system by entering regedit from a run prompt
Navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SysPlant
Open the Start DWORD
Change the value from 1 to 4 to disable the drivers
Reboot the system to commit the changes
2. The other easier solution is to run Google Chrome with --no-sandbox (with two dashes before “no”). To run it with the above option, edit the property of the shortcut you use to launch Google chrome and add the above option at the end of the “target” line (after the path to the chrome exe) i.e. Right click your shortcut to “Google Chrome” and click Properties. In the target text field, add a space then add --no-sandbox (with two dashes before “no”) right after the ending quotation mark. Run using this shortcut.However make sure that there is a space in between the ending quotation mark and the --no-sandbox option that you add.You could find a shortcut to google chrome on your desktop.Also note that you should use two dashes before “no”.
How to configure auto-forwarding for staff?
1. On Exchange Server, open 'Exchange Management Console'.
2. Under 'Recipient Configuration', click on 'Mail Contact'.
3. Right-click on it, and select 'New Mail Contact'. Add the other email address of the user.
4. Under 'Recipient Configuration', click on 'Mailbox'.
5. Select the user's mailbox.
6. Right-click on it, and select 'Properties'.
7. Select 'Mail Flow Settings'.
8. Select 'Delivery Options'.
9. Click on 'Properties'.
10. Click 'Add...'.
11. ...
12. Done.
2. Under 'Recipient Configuration', click on 'Mail Contact'.
3. Right-click on it, and select 'New Mail Contact'. Add the other email address of the user.
4. Under 'Recipient Configuration', click on 'Mailbox'.
5. Select the user's mailbox.
6. Right-click on it, and select 'Properties'.
7. Select 'Mail Flow Settings'.
8. Select 'Delivery Options'.
9. Click on 'Properties'.
10. Click 'Add...'.
11. ...
12. Done.
21 October 2010
Trust relationship failed
Symptom: Can not log in Windows domain, and see an error message saying 'Trust relationship failed.'
Resolution: Delete the domain connection from that machine. Log in with the local admin account. Re-connect to the domain.
Resolution: Delete the domain connection from that machine. Log in with the local admin account. Re-connect to the domain.
Can not log in email accounts with Exchange Server
Symptom: Failed to log in, after entering username and password.
Solution: Go to Windows Domain Server. Remove the tick before 'User must change password'. Tick 'Password never expires'.
Solution: Go to Windows Domain Server. Remove the tick before 'User must change password'. Tick 'Password never expires'.
Copier - Cannon iR C3080 - print a report every time a fax is sent
On the admin web page, go to 'Add. Func. / Custom Settings / Report Settings / Fax Settings / Fax TX Report', change the value from 'For Error Only' into 'On'.
How to link a flash to a website address?
Create another flash file (select ActionScript 2.0). Insert a new symbol - button. Import the former .swf file to the library. Click on the 'Up' frame. Drag the .swf animation from the library to the stage. Create key frames in all the 'Over', 'Down', 'Hit'. Exit symbel editing, and go to the flash file itself. Create an instance of the button on the stage. Click the button to select it. Open Window/Behaviours. Add a behaviour - 'Web / Go to Web Page'. Input the web address.
Done.
Done.
How to transfer Contacts to Exchange Server?
Copy them from 'Contacts in Personal Folders' into 'Contacts'.
Done.
Done.
How to transfer Calendars to Exchange Server?
1. Open Outlook.
2. Click 'View / Current View / All Appointments'.
3. Click 'Calendar in Personal folders'. Select all. Copy them.
4. Click 'Calendar'. Paste.
Done.
2. Click 'View / Current View / All Appointments'.
3. Click 'Calendar in Personal folders'. Select all. Copy them.
4. Click 'Calendar'. Paste.
Done.
How to configure auto reply for staff?
Staff can do it by themselves.
Administrator can also do it for them. 1. log in 'https://webmail ...' with Administrator account.
2. Click on 'Options'.
3. At the top left corner, in 'Select what to manager', select 'Another User ...'.
4. Search for the person. Click on 'OK'.
5. Click on 'Tell people you're on vacation'.
6. ...
Administrator can also do it for them. 1. log in 'https://webmail ...' with Administrator account.
2. Click on 'Options'.
3. At the top left corner, in 'Select what to manager', select 'Another User ...'.
4. Search for the person. Click on 'OK'.
5. Click on 'Tell people you're on vacation'.
6. ...
20 October 2010
Connecting Finch Outlook to Midland Exchange Server
1. In the 'HOSTS' file, add '(IP address) mailserver.csis3852.local'.
2. Log in with the employee's 3850 account.
3. Open 'Control Panel / Mail'.
4. Add a new email account, manually, not automatically.
5. For 'Server Name', enter 'mailserver.csis3852.local'.
6. For User Name, enter the employee's first name. Click on 'Check User Name' button.
7. For User Name, enter 'csis3852\(email user name)'. Enter the password.
8. Done.
2. Log in with the employee's 3850 account.
3. Open 'Control Panel / Mail'.
4. Add a new email account, manually, not automatically.
5. For 'Server Name', enter 'mailserver.csis3852.local'.
6. For User Name, enter the employee's first name. Click on 'Check User Name' button.
7. For User Name, enter 'csis3852\(email user name)'. Enter the password.
8. Done.
Subscribe to:
Posts (Atom)