Do 'auto-configuration'.
'Ports' > 'Configure Port'. Change Protocol from 'Raw' into 'LPR'. Enter 'lp' in 'LPR Settings/Queue Name'. OK.
Can print now.
If seeing error, e.g. 'the port is being used', etc., then restart computer. Do the above steps again.
Can print now.
Showing posts with label Copier. Show all posts
Showing posts with label Copier. Show all posts
10 October 2023
21 October 2013
Woodside Copier Driver Installation
Woodside copier driver installation
* Download the driver from Sharp website - MXM260_Win32_SPLC_En_1305a.exe
Note: MXM260_Win32_PCLPS_En_1305a.exe would not work.
* Run it.
* Select 'Connected via network'.
* Select 'LPT1'.
* Add port - 192.168.6.196
* Select 'Custom'. In 'Settings', change 'Raw' into 'LPR' (as long as it is a copier, then change 'Raw' into 'LPR', otherwise you will often meet 'Offline' problem.
* LPR settings - type in 'lp' in Queue Name.
* Done.
* Download the driver from Sharp website - MXM260_Win32_SPLC_En_1305a.exe
Note: MXM260_Win32_PCLPS_En_1305a.exe would not work.
* Run it.
* Select 'Connected via network'.
* Select 'LPT1'.
* Add port - 192.168.6.196
* Select 'Custom'. In 'Settings', change 'Raw' into 'LPR' (as long as it is a copier, then change 'Raw' into 'LPR', otherwise you will often meet 'Offline' problem.
* LPR settings - type in 'lp' in Queue Name.
* Done.
21 October 2010
Copier - Cannon iR C3080 - print a report every time a fax is sent
On the admin web page, go to 'Add. Func. / Custom Settings / Report Settings / Fax Settings / Fax TX Report', change the value from 'For Error Only' into 'On'.
Subscribe to:
Posts (Atom)