Enable Call Forward to CO?
Setup -
In PBX, edit a new COS #, in which you enable 'Forward to CO'.
Edit your extension number, change your COS # into the new COS #.
To activate Forward -
*7102 9 (des. no.) #
To cancel Forward -
*7100
To enable busy forward to voice message box -
*7105 (voice message no.) #
(End)
31 May 2016
How to Call Forward an Extension to an External Telephone Number Panasonic KX-TA824
https://www.voicesonic.com/panasonic/manuals/Panasonic-Tech-Notes/Panasonic-KX-TA-Tech-Notes/Panasonic-KXTA-824-Ext-to-CO-Line-Forwarding.pdf
Panasonic KX-TA824
1. How to Call Forward an Extension to an External Telephone Number
You must first Program the telephone system to set which extensions have permission to do this.
Go into the Programming Mode at Extension 101
Go to Program 607
This where you determine which extensions are allowed to send their calls to an external number
Enable all jacks
Go to Program 963
This enables incoming CO calls to be forwarded back out on another CO Line to extensions that have
CO Forward ability from Program 607
Enable all jacks
Go to Program 400
Make sure that only working CO Lines show as CONNECTED.
2. How to set an extension to forward its calls to an external number.
Go to the extension you want to forward.
Press the Intercom Button
Dial 7139 + the telephone number you want to send the calls to followed by a #. (POUND BUTTON)
Example to send a call to 1 212 235-1234
You would press the Intercom Button and dial 713912122351234#
To Cancel Call Forwarding to a CO Line:
Press the Intercom Button
Dial 710# (7 1 0 POUND)
Panasonic KX-TA824
1. How to Call Forward an Extension to an External Telephone Number
You must first Program the telephone system to set which extensions have permission to do this.
Go into the Programming Mode at Extension 101
Go to Program 607
This where you determine which extensions are allowed to send their calls to an external number
Enable all jacks
Go to Program 963
This enables incoming CO calls to be forwarded back out on another CO Line to extensions that have
CO Forward ability from Program 607
Enable all jacks
Go to Program 400
Make sure that only working CO Lines show as CONNECTED.
2. How to set an extension to forward its calls to an external number.
Go to the extension you want to forward.
Press the Intercom Button
Dial 7139 + the telephone number you want to send the calls to followed by a #. (POUND BUTTON)
Example to send a call to 1 212 235-1234
You would press the Intercom Button and dial 713912122351234#
To Cancel Call Forwarding to a CO Line:
Press the Intercom Button
Dial 710# (7 1 0 POUND)
30 May 2016
Unable to launch ASDM?
'Unable to launch ASDM from 192.168.x.x:
java.security.cert.CertificateException: Certificates does not conform to algorithm constraints'
When you want to run ASDM and log on your CISCO firewall, you see the above error message?
Solution:
In your browser, go to -
https://192.168.x.x
you will be brought to the 'Cisco ASDM 5.2' page. You have 3 options, actually 2; the other - 'Run startup wizard applet' will walk you through the initial configuration, which is not what we want.
Choose Option 2 - 'Run ASDM Applet'.
If there are any problems with certificates, then do two things -
1. In your browser, add your firewall IP to Trusted sites;
2. Go to Control Panel | Java | Security tab, put your firewall IP to the 'Exception Site List'.
(End)
java.security.cert.CertificateException: Certificates does not conform to algorithm constraints'
When you want to run ASDM and log on your CISCO firewall, you see the above error message?
Solution:
In your browser, go to -
https://192.168.x.x
you will be brought to the 'Cisco ASDM 5.2' page. You have 3 options, actually 2; the other - 'Run startup wizard applet' will walk you through the initial configuration, which is not what we want.
Choose Option 2 - 'Run ASDM Applet'.
If there are any problems with certificates, then do two things -
1. In your browser, add your firewall IP to Trusted sites;
2. Go to Control Panel | Java | Security tab, put your firewall IP to the 'Exception Site List'.
(End)
11 May 2016
How to Get a New IP address from DHCP Server?
http://superuser.com/questions/470585/how-to-force-windows-7-to-ask-for-a-fresh-ip-address-from-dhcp-server
the whole process would be (in an Administrator cmd window):
the whole process would be (in an Administrator cmd window):
ipconfig /release
net stop dhcp
net start dhcp
ipconfig /renew
Subscribe to:
Posts (Atom)